South Bay, Alviso to GilroyRequests: info@sanjosepalletbuyers.com

Empty pallets are paying rent

Pallets in San Jose and the South Bay: we buy the ones taking up your floor

We buy the pallets taking up your South Bay floor space, clear mixed loads and supply sorted stock, from Alviso to Gilroy.

A 56 by 36 foot dock bay drawn to scale. Two hundred empty 48 by 40 pallets, stacked ten high in twenty stacks, cover a 20 by 13.3 foot patch of floor, about 267 square feet.Door 01Door 02Door 03Door 04Door 05267 sq ft20 ft: 5 stacks of 48 in13.3 ft: 4 deepOne stack: 10 empties,about 5 ft high20 stacks = 200 palletsBay 56 x 36 ft, drawn to scale. Grid squares are 4 ft.Two hundred empty 48 by 40 pallets in twenty stacks cover 20 by 13.3 feet of floor, about 267 square feet.267 sq ft20 ft13.3 ft
200 empties, 48x4020 stacks, 10 high267 sq ft of floor$475 a month at the CBRE Q3 2026 average, not your rent

What 2,400 square feet holds

In the South Bay, floor space is the expensive part, and empty pallets sit on it. We buy surplus, clear mixed piles and supply sorted stock to the docks that ship on it.

One 48x40 pallet covers about 13.3 square feet. The drawing below fills an 80 by 30 foot bay, 2,400 square feet, with 180 of them side by side. Scroll it in and count the dock doors you would lose.

13.3sq ft in one 48x40180footprints in the bay2,400sq ft, to scale

Stacking changes the count, not the idea. 200 empties stacked 10 high are 20 stacks, and the floor under them is about 267 square feet before any aisle is added.

Count your floor

Enter what is piling up and see the square feet it takes.

Each pallet is taken as 6 in thick, so 10 high is about 5.0 ft.

267
SQ FT OF FLOOR

20 stacks of 10, each 13.3 sq ft. Stacks side by side, no aisle allowance.

Clear this floor
Sell or clear

What we take

Loads that leave a dock heavier than anyone wants. In plain terms:

  • Grade A and B surplus 48x40s that still hold a load. Sold as surplus, usually in bulk.
  • Cores: used pallets you no longer need, which go on to repair, remanufacture or grinding.
  • Mixed loads: several sizes and grades in one pile, the normal result of a few weeks of receiving.
  • Odd sizes and crates: tool skids, equipment crates and anything built to a one-off spec. List crates in the request with their outside size.
Sell or clear
Buy

What we send out

Stock for outbound loads, described by grade and size, never as a blanket promise:

  • Grade A and B used pallets for standard 48x40 loads.
  • Combo pallets: recycled and new lumber, more consistent than used.
  • New and custom builds to a spec sheet, including odd sizes.
  • Heat-treated pallets with the ISPM 15 mark, for anything that leaves the country.
Buy sorted stock

Grades, plainly

Most arguments about a pallet come down to repairs. Grade A has none and needs none. Grade B has been repaired with replaced deck boards, plates or plugs, and still ships fine. The full guide is at Grade A vs Grade B.

GRADE AGRADE BNo repairs, none needed.Original boards, intact stringers.Replaced deck board (dashed) and a plugbeside the cracked stringer (dark).
Side view, not to scale: how repairs show on a stringer pallet. The drawing is schematic.
GradeWhat you seeUsually shipped on
Grade ANo repairs; boards and stringers originalClean outbound loads, food, packaged goods
Grade BReplaced deck boards, plates or plugsGeneral freight, parts, industrial loads
ComboRecycled and new lumber, remanufacturedLoads that want consistency at a lower cost than new
CoreUsed pallet handed on for repair or recyclingNot shipped on: repaired, dismantled or ground

Send the request

Say what is piling up, or what the next outbound load needs. One request covers selling, clearing and buying.

Send a request